The entire process of manufacturing medical-grade stainless steel tubing

19 Oct,2022

The entire process of manufacturing medical-grade stainless steel tubing

As technology continues to advance, stainless steel pipe products have kept pace, with numerous new models being developed. Yet their fundamental characteristics remain unchanged, and the manufacturing and production processes are largely similar across the board. Here, a stainless steel pipe manufacturer will provide an overview for you. Medical-grade stainless steel tubing The entire process of the manufacturing technology.

SmG5W8QBRJK6i3qSOH5Kew.jpg 


I. Heat Treatment of Medical Stainless Steel Tubes
In the metal heat‑treatment process, the workpiece is heated to a specified temperature, held at that temperature for a certain period, and then cooled slowly. The purpose of annealing is to mitigate or eliminate various microstructural defects and residual stresses introduced during casting, forging, rolling, and welding, thereby preventing deformation and cracking of the workpiece and softening it to facilitate subsequent machining. It also prepares the microstructure for subsequent heat treatment and pipe manufacturing.
II. Key Points for Medical Stainless Steel Tube Sheet Rollers
Stainless steel plate slitting involves cutting stainless steel plates to specified widths for subsequent processing and pipe manufacturing. During the slitting process, attention must be paid to blade marks on the plate, as well as slit width and dimensional tolerances. In addition to the pipe‑making stage, proper slitting of overlapping sections and removal of burrs are critical to ensuring high‑quality pipe production.
III. Medical-grade stainless steel tubing Welding
Stainless steel pipe fabrication is an important process; it primarily employs argon arc welding and plasma welding, with pure argon serving as the shielding gas in argon arc welding.
IV. Grinding of Welding Paths
During the welding of stainless steel pipes, the weld bead must be polished and water-cooled. First, the weld bead is cooled with water, followed by grinding and finishing.
V. Forming of Medical Stainless Steel Tubes
The manufacturing process for stainless steel welded tubes is known as extrusion. All square and rectangular tubes are produced by first forming round tubes of the same perimeter, then extruding them into the desired square or rectangular shapes, followed by shaping and straightening.
VI. Cutting
Stainless steel pipes used for cutting are typically manufactured with a relatively rough finish; most are cut using abrasive grinding wheels, which produce burrs that require additional finishing. Another method is band‑saw cutting, which offers greater precision. Additionally, heat treatment is employed. For pipes intended for specialized applications, annealing or other thermal treatments may be necessary to achieve higher ductility.
VII. Polishing of Medical Stainless Steel Tubes
Typically, surface treatments for product tubes and decorative tubes include polishing, while sandblasting is categorized into round‑grit and straight‑grit types. Grit sizes of 180#, 240#, and 400# are respectively suited to different levels of customer requirements.
VIII. Inspection of Medical Stainless Steel Tubes
Inspection primarily verifies that the pipe fittings’ outer diameter and wall thickness meet specifications, and that the welding process complies with standards.
9. Medical-grade stainless steel tubing Packaging
Stainless steel pipes are typically packaged in plastic bags, though sponge packaging or woven‑bag packaging can also be used.
X. Warehousing

Stainless steel pipes come in a wide range of specifications. Placing them on shelves makes it easier to distinguish between sizes and also helps save floor space.



Previous:

What are the maintenance methods for precision welded pipes?

Next:

Introduction to the Composition of Medical Stainless Steel Tubes